HIDDEN GATE HG 02
CameOzak Speed Gates HIDDEN GATE HG 02
Technical Specifications:
Power Requirements | : | WG 5 ; 110/220 V. 60/50 Hz. AC (%±10) 24 V. DC at standby ~7,5W max. ~27,4W. WG 5 FW ; 110/220 V. 60/50 Hz. AC (%±10) 24 V. DC at standby ~15W max. ~27,4W. |
Wing Features | : | Available in 900 mm standard length. Ø40 mm x 2,5 mm 304-Grade stainless steel wing frame and acrylic infill. (Opt. 450 mm - 600 mm - 1200 mm wing length). (900 mm and 1200 mm wings with acrylic infill are for indoor use only.) |
Body Features | : | 1,5 mm 304-Grade (Opt. 316-Grade) stainless steel with brushed (Opt. Satin) surface. |
Operation Temperature, Humidity,IP Rating, MCBF |
: | -20°C to + 68°C (Opt. -50°C with heater unit), RH 95% non-condensing / IP 54 Outdoor Model (Opt. IP 56) / 1M Cycles |
Control System | : | All inputs are opto-coupler protected. Compatible with all access control systems that provide dry contact or grounding outputs. Optional RS232/RS485/TCP IP control module is available. |
Operation | : | Electronically controlled DC motor driven bi-directional system. |
Emergency Mode | : | System allows free passage in emergency mode and in case of power failure. For WG 5 FW Only; As it is equipped with magnetic locking mechanism, gate opens easily by pushing in case of emergency. Optionally available to comply with German Emergency Exit Regulation. |
Flow Rate | : | Wing Opening / Closing Time ~1,5 - 2,5 sec. |
Standard Features | : | RBG LED Status indicator. |
Optional Accessories and Applications |
: | A passage lane consists of min. 2 pieces of single units facing each other. |
SLIDING GATE 55
CameOzak Speed Gates SLIDING GATE 55
Technical Specifications:
Power Requirements | : | 110/220 V. 60/50 Hz. AC (%±10) 24 V. DC Single Unit: At standby ~10W. During operation ~39W. Center Unit: At standby ~20W. During operation ~78W. |
Wing Features | : | Soft blue illuminated 12mm impact resistant tempered glass (Opt. Polycarbon) wings. Glass Wing Height Options: 900 mm - 1200 mm - 2000 mm in standard. |
Body Features | : | The body is made of 304-Grade (Opt. 316-Grade) satin finished stainless steel. Natural granite (Star Galaxy Black Pattern) stone on top is standard feature for a decorative and aesthetical appearance. (Opt. Materials and patterns available) |
Operation Temperature, Humidity,IP Rating, MCBF |
: | -20°C to + 68°C / RH 95% non-condensing / IP 44 Indoor Model / 1M Cycles |
Control System | : | All inputs are opto-coupler protected. Compatible with all access control systems that provide dry contact or grounding outputs. Optional RS232/RS485/TCP IP control module is available. |
System Features & Operation | : | Electronically controlled rapid wing movement for quick and smooth bi-directional passages. Internal dip switch selectable free passage by photocell detection, restricted access, controlled access on both or single direction modes are built in features. |
Emergency Mode | : | System allows free passage in emergency mode and in case of power failure (powered by internal back-up battery). |
Flow Rate | : | Wing Opening Speed/Time: 0,5 sec. Wing Closing Speed/Time: 0,5 sec. Nominal: ~30 - 60 passages/minute (Recommended reference figure). *Utilisation of different access control units can change the flow rate. |
Standard Features | : | Dot matrix direction and status indicators, natural granite top lid, stainless steel and acrylic reader cover plates for both directions. |
Optional Accessories and Applications |
: | Tempered glass side (lateral) panels, Remote control unit, interface unit for PC, RS485, RS232 and LAN, counter, audio-messaging system, alarm sensor, floor mounting plate, coin slot/intelligent coin system and coin box, separator, card reader pole. |
Note | : | A passage lane consists of min. 2 pieces of single units facing each other. |
Technical Features
Body Features Electrostatic powder coated steel body (opt. 304 grade stainless steel).
Wing Features 12 mm thick tempered glass wings (opt. acrylic wings).
Top Lid 10mm acrylic top lid, 6 mm acrylic side panels between vertical posts (opt. tempered glass)
Power Requirements
110/220-240 V. 60/50Hz. AC (%±10) 24V. DC
Single Unit : At standby ~10W during operation ~39W
Center Unit : At standby ~10W + ~10W during operation ~39W + ~39W
Control System
All inputs are opto-coupler protected. Compatible with all access control systems that provide dry contact or grounding outputs.
Optional RS232/RS485/TCP IP control module is available.
Clear Passage Width 550mm and 900mm suitable for passages with wheelchair, trolley etc.
Flow Rate
Wing opening speed/time: ~0,5-1,2 sec. Wing closing speed/time: ~0,5-1,2 sec.
Nominal: ~30 - 60 passages/minute (recommended reference figure).
*Utilisation of different access control units can change the flow rate.
System Features &
Operation
Electronically controlled wing movement for quick and smooth passages to the passage direction. In case of emergency, the system
allows free passage by opening the wings and can be manually opened in case of a power failure.
Emergency Mode System allows free passage in emergency mode and in case of power failure.
Operation Temperature,
Humidity,IP Rating
-20°C to + 68°C / RH 95% non-condensing / IP 44 indoor model.
Optional Accessories
and Applications
Tempered glass side panels, remote control unit, interface unit for PC, RS485, RS232 and LAN, counter, audio-messaging system,
bottom plate, coin slot/intelligent coin system and coin box, separator, card reader pole, different wing heights.
Note A passage lane consists of min. 2 pieces of single units facing each other.