MD70 Touch Panel with MIFARE ReaderMCT88M-IO Access TerminalMCT86M-IO-CH-HR Access TerminalMD70 is a graphical touch panel with built-in camera and 13.56 MHz proximity reader. Generally, terminal is dedicated to operation in as a user authentication device and system commanding terminal in the RACS 5 access control and building automation system. apacitive touch screen 7”/800 x 480 px 8 GB flash memory 2 Mpx camera with autofocus communication interfaces: Ethernet, WiFi (802.11 a/b/g/n) and RS485 card reader ISO/IEC 14443A/MIFARE Ultralight, Classic, DESFire EV1 Plus possibility of installation additional mobile applicationsspeaker and microphone status LED indicators Quadrus series design power supply: nominal 12 VDC, min./max. range 10-15 VDC average current consumption 500 mA (depends on CPU load) maximum current consumption 800 mA (depends on CPU load) dimensions: 134.0 x 218.0 x 25.0 mm (height x width x thickness) weight: ≈500 g CE mark environmental class (according to EN 50131-1): class I indoor general conditions temperature: +5°C to +40°C relative humidity: 10 to 95% (no condensation) The MCT88M-IO is an access terminal dedicated to RACS 5 system. The terminal is equipped with colour matrix display, sensor type keypad, 4 function keys and MIFARE® Ultralight/Classic/DESFire/Plus/NFC/Bluetooth reader. MCT88M-IO can be connected to RS485 bus of MC16 access controller directly or via MCX16-RS expander using Ethernet network (LAN). Alternatively the terminal can be connected to virtual controller through Ethernet network (LAN). access terminal for RACS 5 colour matrix display MIFARE Ultralight/Classic/DESFire/Plus Bluetooth mobile identification NFC mobile identification sensor type keypad four function keys three EOL inputs two transistor outputs one relay output RS485 Ethernet (LAN) QUADRUS line design IP41 dimensions: 85.0 x 155.5 x 21.5 mm (height x width x thickness) weight: ≈190.0 g CE mark environmental conditions of operation: temperature from +5°C to +40°C humidity from 10% to 95% The MCT86M-IO-CH-HR is a RACS 5 system terminal dedicated to hotel installations. The main function of the device is to disable electric supply of the room during the time when guest is absent, and indication and control of the hotel signalisations: Do Not Disturb, Make up the Room, Emergency Call and Service Call. Controller’s reaction for card in/out can be programmed and depends on its authorization. Terminal offers 4 control buttons and status LEDs dedicated to control and present status of hotel signalisations. MIFARE Ultralight/Classic/DESFire/Plus card reader 4 large touch type function keys 4 status LEDs 3 EOL inputs 2 transistor outputs 150 mA 1 relay output 1.5 A adjustable buzzer loudness automatic LED dimming when in standby connection to controller through RS485 12 VDC supply tamper indoor operation only dimensions: 85.0 x 155.5 x 21.5 mm (height x width x thickness) QUADRUS series product line CE mark MCT82M Proximity ReaderMCT80M-BLE Access TerminalMCT80M Access TerminalIndoor proximity reader, touch keypad with backlight, screw terminals, optional installation on 60 mm flush mounting box. authentication by Card and/or PIN MIFARE Ultralight, Classic card reader CSN, MSN, SSN card readout support for normal and long card reading method RS485 communication interface tamper contact indoor environment 12 VDC power supply CE mark 3 inputs (refers only to MCT82M-IO) parametric inputs (refers only to MCT82M-IO) double wiring input option (refers only to MCT82M-IO) 2 transistor outputs (refers only to MCT82M-IO) 1 relay output (refers only to MCT82M-IO) he MCT80M-BLE is an access terminal dedicated to RACS 5 access control and building automation system. Terminal enables identification of users by 13.56 MHz MIFARE® Ultralight/Classic/DESFire/PLUS cards and by use of smartphone with NFC or Bluetooth technology. In case of Bluetooth identification the reading range can reach up to 10 meters while other methods offer few centimetres of reading range. The mobile identification requires Roger Mobile Key application installed on Android or iOS phone. access terminal for RACS 5 read 13.56 MHz MIFARE Ultralight/Classic/Classic/DESFire/PLUS cards mobile identification using smartphone with NFC or Bluetooth Door Bell and Light function keys 3 LEDs buzzer RS485 tamper outdoor environment QUADRUS line design dimensions: 100.0 x 45.0 x 16.0 mm (height x width x thickness) 12 VDC power supply CE mark The MCT80M is an access terminal dedicated to RACS 5 access control and building automation system. Terminal enables identification of users by means of 13.56 MHz MIFARE Ultralight® and MIFARE® Classic cards. MCT80M is equipped with RS485 interface which is used for communication with access controller. Because of its relatively small size, reader can be also used as locker/cabinet reader. MCT80M can be installed in outdoor locations without any additional protection measures. The MCT80M is aligned with QUADRUS series product line. access terminal for RACS 5 13.56 MHz MIFARE Ultralight/Classic reader 3 LEDs buzzer RS485 tamper outdoor environment QUADRUS line design dimensions: 100.0 x 45.0 x 16.0 mm (height x width x thickness) CE mark